Industrial Cladding Spraying

Industrial Cladding Spraying Costs

Professional Industrial Cladding Spraying for a Smooth, Durable Finish

Industrial cladding spraying is a practical way to restore the appearance of commercial and industrial buildings without removing and replacing the existing panels. Specialist spray-applied coatings can refresh faded colours, improve the external finish and help protect suitable cladding surfaces from weathering and corrosion.

For businesses planning a warehouse or factory refurbishment, understanding these costs makes it easier to set a realistic budget and compare quotations.

Industrial cladding spraying generally costs between £15 and £35 per square metre. Straightforward projects involving accessible cladding in good condition are more likely to fall towards the lower end. Buildings that need extensive preparation, specialist coatings or complicated access arrangements may cost more.

The table below provides an indicative guide to project budgets.

Cladding areaEstimated cost
100 m²£1,500–£3,500
250 m²£3,750–£8,750
500 m²£7,500–£17,500
750 m²£11,250–£26,250
1,000 m²£15,000–£35,000

These figures are not fixed prices or a quotation for a particular property. Smaller projects may have a higher rate per square metre because equipment setup and preparation costs are spread across a smaller area. Larger projects may benefit from more efficient use of labour and equipment.

A site assessment is the best way to establish the actual cost for your building.

What Affects the Cost of Industrial Cladding Spraying?

The price of each project depends on the work required to prepare the existing surface and apply the new coating. Several factors can influence the final quotation.

Total Cladding Area

The overall size of the surface is a major part of the calculation. A larger warehouse or factory requires more coating materials and labour, increasing the total project cost.

However, the price per square metre may become more competitive on larger projects. Contractors can often spread equipment hire, preparation and setup time across a greater area.

Smaller sections, isolated elevations or buildings with complicated layouts may have a higher rate per square metre.

Existing Cladding Condition

The condition of the panels determines how much preparation is needed before spraying can begin.

Cladding that is mainly faded or discoloured may require cleaning and routine surface preparation. Older panels with corrosion, loose paint, heavy contamination or damaged coatings need more attention.

Preparation may include:

  • Cleaning the surface to remove dirt, grease and other contaminants.
  • Removing loose or deteriorating coatings.
  • Treating areas affected by corrosion.
  • Preparing the substrate for primer and paint application.
  • Protecting surrounding surfaces from overspray.

Additional preparation takes time and may require extra materials, which can increase the overall cost.

3. Cladding Material

Industrial buildings use different types of external cladding, and each material needs a suitable coating system. Common examples include profiled steel, aluminium, plastisol-coated panels and composite cladding.

The existing finish also matters. Some surfaces need specialist primers or additional preparation to achieve good adhesion. The correct products must be selected for the substrate rather than applying the same coating system to every building.

Coating Type and Finish

The coating specification affects both material costs and the amount of work involved. The appropriate system depends on the cladding material, the building’s exposure and the required finish.

A standard colour refresh may need a different specification from a project requiring enhanced corrosion resistance or a specialist protective finish.

The number of coats, primer requirements, colour choice and product performance can all influence the quotation. Choosing a suitable coating from the beginning helps avoid unnecessary expenditure and supports a more durable result.

Building Height and Access

The height and layout of the property can make a noticeable difference to the price. Easily accessible, low-level cladding is generally less expensive to work on than high warehouse elevations or difficult-to-reach sections.

Depending on the building, access may require mobile elevated work platforms (MEWPs), scaffolding or other specialist equipment. Hire charges, transport, setup and additional working time can increase project costs.

Site Location and Working Arrangements

The location of the building and the conditions on site may also affect the quotation. Travel, equipment delivery, restricted access and limited working hours can influence the time and resources required.

For operational warehouses and factories, the work may need to be planned around deliveries, staff movements and normal business activities. Additional arrangements to protect nearby equipment, vehicles and surfaces may also be necessary.

How to Get Better Value from Industrial Cladding Spraying

A lower initial price is not always the most economical choice. The quality of the preparation and coating specification can affect how well the finished surface performs over time.

Consider these practical ways to manage your budget:

  • Arrange an assessment before budgeting: Have the cladding inspected so preparation and access requirements are identified early.
  • Provide accurate measurements: The more accurate the surface area, the more useful the initial estimate will be.
  • Deal with surface problems early: Discuss corrosion, loose coatings and damaged areas before the spraying programme is agreed.
  • Choose suitable coatings: Select products that match the cladding material and the building’s exposure conditions.
  • Plan the work together: Completing several elevations during one project may reduce repeated setup and equipment costs.
  • Compare like-for-like quotations: Check that each price covers the same preparation, primer, coating, access equipment and labour.

If the existing panels remain structurally sound, spraying may also offer a more economical refurbishment option than full cladding replacement.

FAQs

Is industrial cladding spraying cheaper than replacing cladding?

It can be considerably less expensive when the existing panels are suitable for recoating. Spraying retains the current cladding and avoids the costs associated with removing and installing replacement panels. However, damaged or structurally unsuitable cladding may need a different solution.

Does the cost include surface preparation?

This depends on the quotation. Cleaning and routine preparation may be included, but extensive corrosion treatment, removal of failing coatings or repairs can add to the price. Ask for a breakdown so you know exactly what is covered.

Does the type of cladding affect the price?

Yes. Steel, aluminium, plastisol-coated and composite panels can require different preparation methods and coating products. The condition of the existing finish also affects the amount of work involved.

Will building height increase the spraying cost?

It may. High elevations can require MEWPs, scaffolding or other access equipment. These arrangements can increase equipment hire, labour and setup costs compared with accessible ground-level surfaces.

How can I get an accurate quote for my building?

Provide the approximate cladding area, building location, photographs and details of any visible deterioration. A site assessment can confirm the surface condition, preparation requirements and suitable coating specification before a detailed quotation is prepared.

Request a Quote for Industrial Cladding Spraying

Every industrial property has its own requirements, so a site-specific quotation is the best way to understand the cost of the work. The size of the building, condition of the panels, access arrangements and chosen coating system all need to be considered.

If your warehouse, factory or commercial premises has faded, weathered or deteriorating cladding, industrial cladding spraying may provide a practical way to improve its appearance and protect the existing surface.

Get in touch to discuss your industrial cladding spraying project and request a quotation based on your building’s requirements.

What People are Saying About Us

★★★★★

“Our warehouse cladding was still in good condition, but its appearance had deteriorated over time. Rather than replacing the panels, we chose industrial cladding spraying as a practical alternative. The team was organised, paid attention to surface preparation and left the site tidy once the work was complete.”

Raymond Hughes

London

★★★★★

“We wanted a consistent finish across several sections of cladding on our factory building. Communication was straightforward, and the spraying work was carried out methodically around the requirements of our site. The refreshed exterior looks smarter and better suited to the rest of the premises.”

Kenneth Foster

London

★★★★★

“We needed to improve the appearance of our industrial unit, as the cladding had become faded and uneven in colour. The industrial cladding spraying team explained the process clearly and worked carefully across the exterior panels. The finished result looks much more uniform and has given the building a fresh appearance.”

Joanna Mitchell

London

★★★★★

“The outside of our industrial premises needed attention, particularly the older cladding panels exposed to the weather. The team helped us understand the available options and completed the spraying with care. We are pleased with the improvement and glad we explored refreshing the existing cladding instead of replacing it.”

Brenda Collins

London